Software Utility - ICP DAS USA I-7565 User Manual

4. Software Utility

Users can download I-7565 Utility software from the ICP DAS web
site (http://www.icpdas.com/products/Remote_IO/can_bus/i-7565.htm) or
get this information from the ICP DAS companion CD-ROM. The I-7565
Utility tool can be used to configure the operation condition between the
CAN and USB port communications. Also it can be used to transmit or
receive a CAN message for simple testing of the module's functions. To
start the "I-7565 Utility", please run the I7565.exe file. The screenshot of
the startup screen for this Utility is given in the below figure. Connect the
I-7565's USB port with the PC's USB port via a USB cable. Then the user
can connect the CAN interface into the CAN network based on the CAN
specifications. For further information related to this, please refer to
section 2.3 of this manual on how to make a hardware connection.
Figure 11: I-7565 Utility
I-7565 USB/CAN Converter User's Manual (Version 1.0, March/2007) ------------- 19