Menu Messages - ATTACK PELLET 30 AUTOMATIC Plus Instructions For Use Manual

Menu messages

PAUSE
OFF
Press "M" button
EFFECT LEVEL
ENTER
Press "+" button.
PELLET-TRIM
ENTER
Press "+" button.
FINAL-COMBUST
ENTER
Press "+" button.
LAST ERRORS
ENTER
„Troubleshooting".
Press "+" button.
MENU/ADVANCED
ENTER
24
Burner in standby mode.
FC: 0 %
Here you can change burner output. Level 1 = 8–12 kW, Level 2 =
14–30 kW.
EXIT
Range and output Levels are adjustable in advanced menu.
Here you can set supplied amount of pellets. It is not necessary, if
correct weight of pellets had been set in the Pellet trim in service
EXIT
menu.
To clean burner or to abort operation from other reasons, press the
„M" button and the burn-down mode begins. To restart burner after
EXIT
ash removing, press „M".
This internal recording can be helpful by troubleshooting, when
burner stops and alarm is activated. Last 10 different error codes are
EXIT
recorded.
To enter into advanced menu you need password (code). It is
necessary to be familiar with program functions of burner.
EXIT
For more information about error codes, see