Table of Contents
Advertisement
Purpose of usage
The ATTACK PELLET is a modern boiler for wood pellet combustion. By its technology it saves
environment and offers comfort comparable with usage of gas boiler.
Boiler is intended for heating of family houses, shops, industrial objects and other similar buildings.
Boiler description
The ATTACK PELLET 30 AUTOMATIC Plus boiler burns pellets with diameter of 6–10 mm and
max. length of 35 mm.
Construction of boiler is consists from combustion chamber with partition, heat exchanger and flue
connection.
Boiler body cooled by water is a basic part of boiler. It is welded from boiler steel plates of 3–6 mm
thickness to ensure long lifetime. Tubular exchanger is equipped with turbulators, ensuring better
heat transpher into heating water. They also serve for exchanger cleaning to provide uniform
efficiency.
Combustion takes place in the burner. Optimal conditions for burning and output regulation are
ensured electronically, by controlling fuel and air supply, in dependence on the heating parameters
required by user.
Construction of burner, combustion chamber and exchanger ensures optimal burning of all
combustible contents.
Boiler is equipped with device for automatic ash removal from the bottom of combustion chamber
into the external box. Ash removing is set by production for every 12 hours.
Boiler body is insulated with mineral wool. Boiler covering is treated by powder technology.
Boiler can be accessorized with device for fuel supply and with pellet hopper of 450 l. In case of
fuel shortage or burner failure it is possible to use electrical coil up to the 6 kW output (and 450 mm
length), installed into the flange with G 6/4" internal thread on the left side of boiler. This coil can
be also used as an anti freeze protection. Coil is equipped with operating and emergency thermostat.
Its electrical installation is independent from electrical installation of boiler.
6
Advertisement
Table of Contents
