Boiler Protection Against Corrosion - ATTACK PELLET 30 AUTOMATIC Plus Instructions For Use Manual

Biomass boiler
Hide thumbs Also See for PELLET 30 AUTOMATIC Plus:
Table of Contents

Advertisement

Boiler protection against corrosion

Suitable solution of this problem is usage of the mixing device Regumat Attack-Oventrop). This
solution enables creation of separate boiler and heating circuit and prevention against boiler
undercooling under 65°C. Thereby it comes to decrease of water steams condensation and acid and
tar creation in boiler exchanger and combustion chamber.
Usage of device is a condition of the valid warranty.
Regumat serves to keep temperature of the return heating
water flowing into the boiler over 65°C, when thermostatic
head is set to the 5–6th grade. Temperature of 60°C in the
return connection causes increased creation of condensate
and tar and consequently, shorter lifetime of boiler.
Technical parameters:
Clearance
Max.pressure
Max.temperature
Value kvs
The Regumat consists of three way mixing valve, circuit pump, closing valve, thermometers and
isolation. This solution is advantageous due to its compactness, easy attendance and guaranted
protection of the boilers heat exchanger.
Regumat for boiler ATTACK PELLET: ordering code - DPP25003
Binding norms for boiler projecting and assembly:
STN EN 303-5 – Heating boilers for solid fuels
STN 734210 – Design of chimneys and flue exhausts
STN 920300 – Fire safety of local appliances and heat sources
STN EN 60335-1+A11 – safety of el. appliances for household
STN 061000 – Local appliances for solid, liquid and gaseous fuels
STN 060310 – Central heating projecting and assembly
STN 060830 – Safety device for central heating and DHW
STN 077401 – Water and steam for heat energy devices with operation pressure of steam up to
8 MPa
STN 33 2000 4-46 – Electrical installations of buildings. Part 4: Ensuring safety.
STN 33 2000-3 – Electrical installations of buildings. Part 3: Determination of basic characteristics
STN 061008 – Safety of heat devices
STN EN ISO 11202 – Acustics
STN EN ISO 3746 – Acustics
STN EN 62233 – Measuring methods of electromagnetic arrays of appliances for household and
similar devices by the exposition of persons
STN ISO 80000 – Measurements and units
14
DN25
10 bar
120°C
3,9

Advertisement

Table of Contents
loading

Table of Contents