Boiler Protection Against Corrosion; Binding Norms For Boiler Projecting And Assembly - ATTACK PELLET 30 AUTOMATIC PLUS Instructions For Use Manual

Hide thumbs Also See for PELLET 30 AUTOMATIC PLUS:
Table of Contents

Advertisement

BOILER PROTECTION AGAINST CORROSION

Suitable solution of this problem is usage of the mixing device Regumat Attack-Oventrop).
This solution enables creation of separate boiler and heating circuit and prevention
against boiler undercooling under 65°C. Thereby it comes to decrease of water steams
condensation and acid and tar creation in boiler exchanger and combustion chamber.
Usage of device is a condition of the valid warranty.
Regumat serves to keep temperature of the return
heating water flowing into the boiler over 65°C, when
thermostatic head is set to the 5 – 6th grade.
Temperature of 60°C in the return connection causes
increased
creation
consequently, shorter lifetime of boiler.
Technical parameters:
Clearance
Max.pressure
Max.temperature
Value kvs 3,9
The Regumat consists of three way mixing valve, circuit pump, closing valve,
thermometers and isolation. This solution is advantageous due to its compactness, easy
attendance and guaranted protection of the boilers heat exchanger. Regumat for boiler
ATTACK PELLET: ordering code - DPP25003

BINDING NORMS FOR BOILER PROJECTING AND ASSEMBLY:

STN EN 303-5 Heating boilers for solid fuels
STN 734210
Design of chimneys and flue exhausts
STN 920300
Fire safety of local appliances and heat sources
STN EN 60335-1+A11 safety of el. appliances for household
STN 061000
Local appliances for solid, liquid and gaseous fuels
STN 060310
Central heating projecting and assembly
STN 060830
Safety device for central heating and DHW
STN 077401 Water and steam for heat energy devices with operation pressure of steam up
to 8 MPa
STN 33 2000 4-46 Electrical installations of buildings. Part 4: Ensuring safety.
STN 33 2000-3 Electrical installations of buildings. Part 3: Determination of basic
characteristics
STN 061008
Safety of heat devices
STN EN ISO 11202 Acustics
STN EN ISO 3746 Acustics
STN EN 62233 Measuring methods of electromagnetic arrays of appliances for
household and similar devices by the exposition of persons
STN ISO 80000 Measurements and units
of
condensate
DN25
10 bar
120°C
and
tar
and
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pelh30plus

Table of Contents