Width/Length Sensor - Samsung CLX-9350ND Service Manual

3.12.1 Width / Length sensor PB
Perform the following procedure to remove the Width/L g p
[D] [D]
[C]
Service Manual
CLX-9250/9350 series
3. Replacemen
[A]
[B]
nt Procedures
BA
Length Sensor PBAs from the DADF Unit. g
1. Open the DADF cover and stacker.
2. Remove 5 screws.
3. Take off the lower Stacker [A].
4. Release the width sensor PBA [B] after removing
1 screw.
5..Remove the length sensor PBA [C] after removing 5 R th l
2 screws.
6. Release the photo sensor [D] after unplugging the
connector.
3-9 91
th PBA [C] ft
SAMSUNG ELECTRONICS
i