● Code :
U3-3311
U3-3313
U3-3314
● Symptom / Cause :
y
During a DADF job, the document doesn't reach the s
● Troubleshooting method :
1 Open the DADF cover
1. Open the DADF cover.
2. Check if there is any contamination on surface of si
3. Remove the document on the Guide-Pick up Assy.
4. Check if the simplex regi idle roller is working prope
5. Find some obstruction in feeding path.
6. Close the DADF cover.
● Replacement part
Service Manual
CLX-9250/9350 series
7. Troubles
shooting
● Error message :
:
Original paper jam in
nside of scanner
Original paper jam in
nside of scanner
Original paper jam in
nside of scanner
can read sensor in normal time.
mplex regi roller.
erly.
7-1
39
SAMSUNG ELECTRONICS