Samsung CLX-9350ND Service Manual page 415

Digital color laser mfp
Hide thumbs Also See for CLX-9350ND:
Table of Contents

Advertisement

● Code :
H1-1411
H1-1417
H1-1418
● Symptom / Cause :
y
Paper transport jam (paper Input section)
- When you open and close the DCF take away door, t
● Troubleshooting method :
1. Open the DCF take away door. Remove the jammed
1. Open the DCF take away door. Remove the jammed
Close the DCF take away door. After warm up, if sa
2. Check if the wall connector of tray4 pick up unit is co
3. Enter the diagnostic mode, and check the feed sens
If the paper is contacting sensor and "Without paper"
4. Check if the connector of the tray4 pick up unit on th
Reconnect it.
5. Replace the DCF (or HCF) controller.
● Replacement part
● Replacement part
- JC93-00070A (FRAME MAIN-PICK UP)
- JC93-00174A (FRAME MAIN-PICK UP SECOND)
Service Manual
CLX-9250/9350 series
7. Troubles
shooting
● Error message :
Paper jam inside of m
machine.
the paper has jammed at the tray4 feed sensor.
d paper.
d paper.
me jam occurs, check the following.
onnected properly. Reconnect the connector.
sor test of the tray1 pick up unit.
" message is displayed, replace the sensor.
he pick up drive unit is connected properly.
7-7
75
SAMSUNG ELECTRONICS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clx-9250nd

Table of Contents