Samsung CLX-9350ND Service Manual page 500

Step Section
7 TRC Report
8 Toner supply
device
9
10
Service Manual
CLX-9250/9350 series
7. Troubles
Check item
Print the TRC report (Servic
Information > Printer Report
Control History > Print). Plea
there is any error in the repo
number greater than zero in number greater than zero in
stands for an error. Also che
ErC, ErK. LocL, LocC, and L
Connectors are loose.
Motor is defective.
The problem has been elimi
the checks of steps up to 9
shooting
Result
e Report > Yes
ts > TRC
ase check if
ort. If any
"Fail" column Fail column
eck ErY, ErM,
LocR column.)
Yes
Yes
nated through No
7-1 60
Action
1. Check if the ITB
engage and disengage is
operated normally.
2. Replace the Imaging
Unit. Unit
Reconnect.
Change the toner supply
motor.
 Change video board
 Change LSU.
 Change HVPS board.
SAMSUNG ELECTRONICS