Samsung CLX-9350ND Service Manual page 190

3.7.8 DC Power PBA
Perform the following procedure to remove the DC Po
[A]
[B]
Service Manual
CLX-9250/9350 series
3. Replacemen nt Procedures
wer PBA from the printer.
1. Remove the Upper Rear Cover [A] after
removing 7 screws. removing 7 screws
2. Remove the Lower Rear Cover [B] after
removing 5 screws.
3. Unplug all of the connectors, remove 4 screws,
and remove the DC Power PBA.
3-6 62
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
SAMSUNG ELECTRONICS