Samsung CLX-9350ND Service Manual page 129

3. Replacement proce
This chapter includes procedures for replacing service
3.1 General Disassembly Pr
When you disassemble and reassemble components
The close proximity of cables to moving parts makes p
components make sure that any cables disturbed by t components, make sure that any cables disturbed by t
their original positions. Before removing any compone
surrounding part configurations.
Whenever servicing the machine, you must perfor
1. Check to verify that documents are not stored in m 1. Check to verify that documents are not stored in m
2. Be sure to remove the toner cartridge before you d
3. Unplug the power cord.
4. Use a flat and clean surface.
5. Replace only with authorized components.
6. Do not force plastic-material components.
7. Make sure all components are in their proper posi
Service Manual
CLX-9250/9350 series
3. Replacemen nt Procedures
edures
eable parts on the printer.
rocedure Precautions
in the printer, you must use extreme caution.
proper routing very important. When you remove
the procedure are restored as close as possible to the procedure are restored as close as possible to
ent from the machine, note the cable routing and
m the following:
memory. memory.
disassemble parts.
tion.
3- 1
SAMSUNG ELECTRONICS