Fuser Unit - Samsung CLX-9350ND Service Manual

3.5 Fuser unit

This section contains the procedures for disassemblin
Perform the following procedure to remove the Align s
CAUTION CAUTION
The temperature gets high in the vicinity of the fuser
replacing it, make sure that fuser unit has cooled.
Service Manual
CLX-9250/9350 series
3. Replacemen
[ ] [A]
[B]
nt Procedures
ng the components of the printer Fuser Unit.
set from the Scan Unit.
unit. When replacing it, you may get burned. Before
1. Open the Cover-Side.
2. Remove 2 fuser locking screws.
3. Remove the Fuser unit by holding the
handles [A].
CAUTION CAUTION
The fuser unit weighs about 6 kg. When
removing it, be careful!.
When removing the fuser unit, please hold
both handles, If holding only one handle, it
may be damaged.
CAUTION
1. Before this disassembling the fuser unit,
remove the Bracket inlet guide [B]. If it is
damaged or bent, it may make a paper jam.
2. To remove Bracket inlet guide [B], remove 3
screws. When replacing it, be careful not to be
damaged to the belt/pressure roller.
NOTE
The shape or color of some parts can be
changed without notice.
3-2 28
SAMSUNG ELECTRONICS