● Code :
S2-3114
● Symptom / Cause :
ACR error has occurred.
● Troubleshooting method :
1. Perform the ACR calibration manually.
2. Check if the ACR sensor is defective and connector
3. Check the image density and the belt.
4. Replace the engine controller.
● Replacement part
● Replacement part
- JC32-00012A : PBA SENSOR ACR
- JC92-02129A : PBA-ENGINE (CLX-9350ND)
- JC92-02239A : PBA-ENGINE (CLX-9250ND)
Service Manual
CLX-9250/9350 series
7. Troubles
shooting
● Error message :
Engine System Failu
ure #S2-3114 : Turn off then on.
r is connected properly.
Engine board
7-1
17
SAMSUNG ELECTRONICS