Samsung CLX-9350ND Service Manual page 16

1.2.5 Disregarding this warning may
(1) Be careful with high temperature components.
The fuser unit works at a high temperature. Use cau
cool down before disassembly.
(2) Do not put fingers or hair into the rotating parts.
When operating a printer, keep your hands and hair
motor, fan, etc.).
(3) When moving the printer :
- When transporting/installing the equipment, employ fo
- Be sure not to hold the movable parts or units (e.g. th
equipment.
- Be sure to use a dedicated outlet with 110V/220V pow
- The equipment must be grounded for safety.
- Select a suitable place for installation. Avoid excessiv
sunlight.
- Provide proper ventilation since the equipment emits
- The equipment must be installed near the socket outl q p
-Be sure to fix and plug in the power cable securely afte
-If you are moving the machine a short distance, you sh
(e.g : same building through elevator)
-If you are moving the machine a long distance, you sh
& staple unit, tape and disassemble all trays. (e.g : m
Service Manual
CLX-9250/9350 series
1. Preca autions
cause bodily injury
ution when working on the printer. Wait for the fuser to
r away form the rotating parts (Paper feeding entrance,
our people and be sure to hold the lifting handles.
e control panel, DADF) when transporting the
wer input.
ve heat, high humidity, dust, vibration and direct
a slight amount of ozone.
et and must be accessible.
er the installation so that no one trips over it.
hould separate the finisher.
hould remove toner & imaging unit, lock scan carrier
moved by truck or so)
1- -4
SAMSUNG ELECTRONICS