Hvps Board - Samsung CLX-9350ND Service Manual

3.7.9 High Voltage Power Supply
Perform the following procedure to remove the HVPS P
NOTE – This model has 2 HVPS boards.
1. Open the video/engine shield door.
2. Remove the Lower Rear Cover after removing 5
screws.
3. Unplug 2 connectors.
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
CAUTION
When unplugging this connector, be careful not to
get hurt yourself. h lf
Service Manual
CLX-9250/9350 series
3. Replacemen nt Procedures
y (HVPS) PBA
PBA from the printer.
4. Remove 5 screws.
5. Put the SMPS box [A] down as shown below.
[ ] [A]
3-6 63
SAMSUNG ELECTRONICS