Nc Thermistor And Thermostat - Samsung CLX-9350ND Service Manual

3.5.1 NC thermistor and thermostat

Perform the following procedure to remove the NC The
1. Lift the Frame fuser top [A] after removing 1 1 Lift the Frame fuser top [A] after removing 1
screw.
2. Take off the NC thermistor holder [B] after removing
5 screws and 2 connectors. 5 d 2
Service Manual
CLX-9250/9350 series
3. Replacemen
[A]
[B]
nt Procedures
ermistor and Thermostat from the Fuser Unit.
3. Release the NC thermistor [C] from the holder 3 Release the NC thermistor [C] from the holder
[B].
4. Unplug the harness from both sides of the
thermostat . h
5. Remove 3 screws.
3-2 29
[C]
CAUTION
Observe precautions
For handling For handling
Electrostatic
Sensitive
Devices
SAMSUNG ELECTRONICS