Samsung CLX-9350ND Service Manual page 280

• Diagnostics > Adjustment > Print Adjustmen
Purpose
Operation
Procedure Procedure
Verification Verification
Specification
Reference
• Diagnostics > Adjustment > Print Adjustmen
Purpose
Operation
Procedure
Verification
Specification
Reference Reference
Service Manual
CLX-9250/9350 series
To correct magnification of print
1. Press "Vertical Magnificatio
2. Vertical magnification (c,g) 2 Vertical magnification (c g)
specification, press"+". Othe
3. Horizontal magnification(d,h
specification, press"+". Othe
Example
Cases
ⓒ or ⓖ = 398.0 m ⓒ or ⓖ = 398 0 m
ⓒ or ⓖ = 402.5 m
ⓓ or ⓗ = 275.3 m
ⓓ or ⓗ = 278.9 m
Print out and measure if the len Print out and measure if the len
(277mm) in the print-out are cor
ⓒ,ⓖ : 400mm, ± 1.5mm (A3)
ⓓ,ⓗ : 277mm, ± 1.5mm (A3)
Figure 5-1, 5-2
To correct image position of pri
1. Select a tray required adjus
2. Change the adjustment valu
Edge while "-" value will mo
Example
Cases
ⓐ = 8.5 mm
ⓑ = 11.6 mm
ⓔ = 8 0 mm ⓔ = 8.0 mm
ⓕ = 13.0 mm
Print out and check if all the pos
located within the specified limit
ⓐ,ⓑ,ⓔ,ⓕ : 10mm, ± 1.5mm
Figure 5-1, 5-2 Figure 5 1 5 2
4.Servic ce Mode
nt > Magnification
t-outs manually.
on" or "Horizontal Magnification"
: If the current value is smaller than the : If the current value is smaller than the
erwise, press "-".
h) : If the current value is smaller than the
erwise, press "-".
Vertical
Adjustment
+20 +20
mm mm
mm -25
mm
mm
gth of vertical (400mm) and horizontal line gth of vertical (400mm) and horizontal line
rrect.
nt > Image Position
nt-outs manually.
stment.
ue with arrow button. "+" value will move to Tail-
ove to Lead-Edge.
Sim mplex Simplex
Lea ading Side Edge
Ed dge
+ +15
-16
sition of scale marks (ⓐ,ⓑ,ⓔ,ⓕ) in the image are
t.
4-3 31
Horizontal
Adjustment
+17
-19
Duplex Duplex
Leading Side Edge
Edge
+20 +20
-30
SAMSUNG ELECTRONICS