Samsung CLX-9350ND Service Manual page 468

Digital color laser mfp
Hide thumbs Also See for CLX-9350ND:
Table of Contents

Advertisement

● Code :
U1-2115
● Symptom / Cause :
The toner on printed page is not fixed perfectly. (Fuse
It is difficult to remove a jammed paper or paper tears
● Troubleshooting method :
1. Turn the machine off and turn it on again.
2. When you open and close the side door, check if th
2. When you open and close the side door, check if th
3. Enter the diagnostic mode. Execute the fuser press
4. If the problem persists, check the following :
A. Turn the machine off.
B. Remove the fuser unit from the machine.
C. Remove the Frame-fuser rear of the fuser unit.
D. Check the connection of the fuser pressure motor
E. Rotate the warm gear located in the left of pressu
Check if the position of pressure roller moves and
F. Check if the fuser pressure motor is defective.
5. If the problem persists, replace the fuser unit.
● Replacement part
- JC31-00110B : MOTOR STEP
- JC91-00931A : FUSER (220V)
- JC91-00930A : FUSER (110V)
Service Manual
CLX-9250/9350 series
7. Troubles
shooting
● Error message :
:
Fuser Unit Failure #
#U1-2115 : Turn off then on.
r pressure error)
easily.
ere is a sound of the fuser pressure motor.
ere is a sound of the fuser pressure motor.
sure motor test.
r.
ure motor.
gears related to pressure rotates.
7-1
28
SAMSUNG ELECTRONICS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clx-9250nd

Table of Contents