Samsung CLX-9350ND Service Manual page 435

● Code :
S1-1411
● Symptom / Cause :
Communication error between Main CPU and Video p
● Troubleshooting method :
1. Did you replace the HDD / Video board?
Yes : Update the firmware for the new board.
(Refer to chapter 5. Firmware update) (Refer to chapter 5. Firmware update)
2. Does the problem occur after updating the firmware
Yes :
A. Print the configuration report and check the fir
B. If all software versions are not normal, update
C. If the problem persists, replace the defective d
3. Replace the Video board.
● Replacement part
- JC92-02150A : PBA-MAIN (CLX-9350ND) JC92 02150A PBA MAIN (CLX 9350ND)
- JC92-02235A : PBA-MAIN (CLX-9250ND)
Service Manual
CLX-9250/9350 series
7. Troubles shooting
● Error message :
:
Video System Failur re #S1-1411 : Turn off then on.
process chip on video board.
e?
rmware version.
e the firmware again.
device. (HDD / Video board )
7-9 95
SAMSUNG ELECTRONICS