Samsung CLX-9350ND Service Manual page 177

Check the thermostat assembly status.
Check the NC thermistor assembly status. Ch k th NC th
Check the harness/connector assembly status. Check the harness/connector assembly status.
CAUTION
If the connector is not connected properly, overheating
Check the assembly position, connection status.
After the fuser repair, check the following.
- The fuser unit weighs about 6 kg. Be careful not to dr
- When installing fuser unit, hold the both side handles
- When installing fuser unit, do not apply force.
- Check if the both handles are locked properly.
- Fix 2 screws.
- Close the side cover and check if the machine is ope Cl h id
Service Manual
CLX-9250/9350 series
3. Replacemen
i t bl t t
d h k if h hi
nt Procedures
- Check if the thermostat is fixed properly.
- Check if both harness are connected properly.
CAUTION CAUTION
If Thermostat or harness connection is not stable,
overheating/fire can occur because the overheat-
protective function can not be performed properly.
- Check if the NC thermistors are fixed properly.
- Check if the NC thermistor connectors are
connected properly.
CAUTION
If the NC thermistor connector is not connected If the NC thermistor connector is not connected
properly, overheating/fire can occur.
g/fire can occur.
rop it.
s.
i erated properly. d l
3-4 49
SAMSUNG ELECTRONICS