Protocols And Standards; Igmp Snooping Configuration Task List - HP A5500 SI Switch Series Configuration Manual

Hide thumbs Also See for A5500 SI Switch Series:
Table of Contents

Advertisement

IGMP message
Report
Leave

Protocols and standards

RFC 4541, Considerations for Internet Group Management Protocol (IGMP) and Multicast Listener
Discovery (MLD) Snooping Switches

IGMP snooping configuration task list

Complete these tasks to configure IGMP snooping:
Task
Configuring basic functions of
IGMP snooping
Configuring IGMP snooping
port functions
Configuring IGMP snooping
querier
Configuring IGMP snooping
proxying
Configuring an IGMP snooping
policy
Actions
When receiving a report for a multicast group, the proxy looks up the
multicast forwarding table for the entry for the multicast group. If the
forwarding entry is found with the receiving port contained as a
dynamic member port in the outgoing port list, the proxy resets the
aging timer for the entry. If the forwarding entry is found but the
outgoing port list does not include the receiving port, the proxy adds
the port to the outgoing port list as a dynamic member port and starts
an aging timer for it. If no forwarding entry is found, the proxy
creates the entry, adds the receiving port to the outgoing port list as a
dynamic member port and starts an aging timer for the port. Then, it
sends a report to the group out all router ports.
In response to an IGMP leave message for a multicast group, the
proxy sends a group-specific query out the receiving port. After
making sure that no member port is contained in the forwarding entry
for the multicast group, the proxy sends a leave message to the group
out all router ports.
Enabling IGMP snooping
Configuring the version of IGMP snooping
Configuring static multicast MAC address entries
Configuring aging timers for dynamic ports
Configuring static ports
Configuring simulated joining
Configuring fast-leave processing
Disabling a port from becoming a dynamic router port
Enabling IGMP snooping querier
Configuring IGMP queries and responses
Configuring source IP address of IGMP queries
Enabling IGMP snooping proxying
Configuring a source IP address for the IGMP
messages sent by the proxy
Configuring a multicast group filter
Configuring multicast source port filtering
19
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A5500 ei switch series

Table of Contents