Note
Selected section
The selected sections and size changes are kept as long as the program is selected.
5.8.2
Panning a graphical representation
Precondition
The simulation or the simultaneous recording is started.
Procedure
Universal
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Press the "Details" and "Auto zoom" softkeys if you wish to
automatically adapt the segment to the size of the window.
The automatic scaling function "Fit to size" takes account of the
largest expansion of the workpiece in the individual axes.
1.
Press a cursor key if you wish to move the graphic up, down, left, or
right.
5.8 Modifying and adapting the simulation graphics
Simulating machining
137