Siemens SINUMERIK 840D sl Operating Manual page 54

Setting up the machine
2.3 Modes of operation
Changing the channel
References
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
Channel switchover via touch operation
On the HT 8 and when using a touch screen operating panel, you can switch to the next
channel via touch operation in the status display.
See also
HT 8 overview (Page 243)
54
Press the <CHANNEL> key.
The channel changes over to the next channel.
- OR -
If the channel menu is available, a softkey bar is displayed. In this
case, the active channel is displayed highlighted (emphasized).
Another channel can be selected by pressing one of the other
softkeys.
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal