Program management
10.14 V24
If you send an archive (*.arc), this is sent directly without being additionally zipped. If you
have selected an archive (*.arc) together with an additional file (e.g. directory), then these
are zipped into a new archive and are then sent.
Reading-in archives
Only archives can be read-in via the V24 interface. These are transferred and then
subsequently unzipped.
Note
Series commissioning archive
If you read-in a series commissioning archive via the V24 interface, then this is immediately
activated.
Externally processing the punched tape format
If you wish to externally process an archive, then generate this in the punch tape format.
Using the SinuCom commissioning and Servicetool SinuCom ARC, you can process the
archive in the binary format and in the series commissioning archive.
Procedure
...
Reading-out archives
236
1.
Select the "Program Manager" operating area, and press the
"NC" or "Local drive" softkey
- OR -
Select the "Start-up" operating area and press the "System
data" softkey.
2.
Select the directories or the files that you wish to send to V24.
3.
Press the ">>" and "Archive" softkeys.
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal