Siemens SINUMERIK 840D sl Operating Manual page 210

Program management
10.3 Executing a program
Procedure
Note
Only workpieces/programs that are located in the NCK memory, local drive or USB drive can
be selected for execution.
210
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Program Manager" operating area.
2. Select the desired storage location and position the cursor on the
workpiece/program that you would like to execute.
3. Press the "Select" softkey.
The controller switches automatically into the "Machine" operating
area.
- OR -
If the selected program is already opened in the "Program" operating
area,
Press the "Execute NC" softkey.
Press the <CYCLE START> key.
Execution of the workpiece is started.
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal