Human Machine Interface Descriptions - GE T1000 Technical Manual

Chapter 9 – Installation
1.2

Human Machine Interface Descriptions

Information
Link
RX
TX
Information
LED module
REASON SWITCHES-TM-EN-3
Optic interface module of 100 Mbps with double fibre (100baseFX,
o
LT connector, multimode fibre);
Optic interface module of 1 Gbps with double fibre (1000baseFX, LC
o
connector, multimode fibre);
Optic interface module of 1 Gbps with double fibre (1000baseFX, LC
o
connector, single-mode fibre)
Optic interface module of 1 Gbps with single fibre (WDM-type
o
transceiver) (1000baseFX, LC connector, single-mode fibre);
T1000 switch option of optic interface module of 2.5 Gbps for ring
o
formation (LC connector, pair of single-mode fibres).
Reason Switches are equipped with LEDs which demonstrate, in real time, the status
of each connected port.
T1000 HMI has three LEDs per port, indicating information as follows.
Colour
Off
Orange
Green
Off
Green
Off
Green
In T1000 switches, link information is also displayed next to each single port, at each
module panel, as seen in the table below:
Colour
Off
Green
GE Reason Switches
Description
No connection
10/100 Mbps connection
1000 Mbps connection
No RX activity
RX activity
No TX activity
TX activity
Description
No connection
Existing Connection
261