GE T1000 Technical Manual page 176

GE Reason Switches
176
If one configuration is desired to be applied at all ports, then the row "*" should be
used, that is, configuration done in the "*" row will be replied to all ports.
After one of the configurations described before is changed, there are buttons that
allow the user to save or discard the configurations.


VLAN Configuration:
o
This menu allows configuring VLAN based IGMP Snooping. By default, no VLAN is
configured at the switch. If a new VLAN specific IGMP entry is required, click at the
Add New IGMP VLAN button. When clicked, it will appear the following fields to be
configured:






Throttling: indicates the maximum multicast
number groups allowed in the port. Possible
values are Unlimited and a range from 0 to 10.
Unlimited means that there is no limit for group
belonging in that port, and numbers shows
maximum multicast group numbers allowed.
Save: save configuration at the Running Config;
Reset: undo changes made locally at the Running Config.
Delete: click at the button to delete the VLAN entry at the
row;
VLAN ID: specify the VLAN that is expected for receiving in
multicast frames from the address at this entry. Allowed
values are the VLAN allowed values (from 1 to 4,095);
Snooping Enabled: enable IPMC Snooping function for
this entry. Checkbox selected means function enabled,
and checkbox empty means disabled;
Querier Election: enable VLAN at this entry to participate
of the querier election. If enabled, this VLAN entry can win
querier election and be selected as a path to the multicast
source to be used by multicast clients. Checkbox selected
means function enabled, and checkbox empty means
disabled;
Querier Address: indicates IPv4 address as source
address used in querier election. Querier election will
define which router or IGMP Snooping switch will forward
traffic if they share the same segment based on its IP
address: the lowest IP address device will win querier
election and then will forward traffic. If not set, IPv4
Chapter 7 – Configuration
REASON SWITCHES-TM-EN-3