GE T1000 Technical Manual page 239

Chapter 8 – Monitoring
REASON SWITCHES-TM-EN-3
Port number;
o

Packets: Received and transmitted traffic, in number of packets;
o
Bytes: Received and transmitted traffic, in bytes;
o
Error: Received packets containing errors and transmitted packets
o
incomplete;
Drops: Received packets that were discarded based on ingress
o
congestion and transmitted packets that were discarded based on
egress congestion.
Filtered: Received frames filtered by forwarding process.
o

QoS Statistics:
QoS Statistics option presents basic information about QoS being executed in each
port, as described below:
Port identifier;
o
Queues (Q0 to Q7 queues): Received (RX) and transmitted (TX)
o
frames at the queue;

QCL Status:
QCL Status option allows user to view information about the QoS Control List (QCL)
configured in the switch. A table containing the following information is shown:
User;
o
QCE identifier;
o
Ports member of the QCL;
o
Frame type configured at QCL;
o
Action executed by this QCL when incoming frames match the QCL
o
filter. At the action columns, information about the CoS, DPL and
DSCP values are displayed;
Conflict information, that is, if there was conflict in the QCE at the
o
QCL shown.

Detailed Statistics:
Detailed Statistics option allows user to view detailed traffic information for a given
Port. It is possible to access this menu by clicking in the Port Number at the Traffic
Overview menu.
This number is a link which redirects to the Detailed
Statistics menu, explained at the Detailed Statistics menu.
GE Reason Switches
239