GE T1000 Technical Manual page 155

Chapter 7 – Configuration
REASON SWITCHES-TM-EN-3
After one of the configurations described before is changed, there are two buttons
that allow the user to save or discard the configurations.
Save: save configuration at the Running Config;
o
Reset: undo changes made locally at the Running Config.
o

Access:
Groups menu allows configuring SNMPv3 access table. By default, default_ro_group
and default_rw_group are created. To add new access configuration, click at the Add
New Entry button and the following field will appear:
Delete: click at the button to delete the filter at the row;
o
Group name: select group name to be configured. Group names
o
listed are get from the Groups menu;
Security Model: select security model to be used in the access.
o
Allowed values are any, v1, v2c and usm. Choose any if any
security model may be used. USM security model is the user-based
security model. V1 and v2c security models are reserved for
SNMPv1 and SNMPv2c use;
Security Level: select the security model to be used for the
o
selected group. Possible values are NoAuth, NoPriv, Auth, NoPriv
and Auth, Priv. "No" at the beginning means no use of authorization
or privacy. Thus, it is possible to choose from no authentication and
no privacy,
authentication and privacy security levels;
Read View Name: select the name which will be shown of this MIB
o
when requested current values. Possible values are None,
default_view or the name of a given view. None means no view
name, default_view means that MIB will be displayed as
default_view and, if a view is created, its name typed at the Views
menu can be used as MIB's name;
Write View Name: select the name which will be shown of this MIB
o
when potentially set new values. Possible values are None,
default_view or the name of a given view. None means no view
name, default_view means that MIB will be displayed as
default_view and, if a view is created, its name typed at the Views
menu can be used as MIB's name;
After one of the configurations described before is changed, there are two buttons
that allow the user to save or discard the configurations.
Save: save configuration at the Running Config;
o
authentication and no
GE Reason Switches
privacy and, finally,
155