GE T1000 Technical Manual page 260

GE Reason Switches
260
T1000 model has DIN rail mounting support;
o
T1000 model with interface connectors on the front panel or on the
o
rear of the chassis;
S2020 and S2024G model with interface connectors on the rear of
o
the chassis;

Power Supplies
Internal power supplies with redundancy;
o
Nominal AC voltage range of 110 to 240 VAC;
o
Nominal DC voltage range of 100 to 250 VDC;
o
Nominal DC voltage range of 24 to 48 VDC;
o
Redundant internal energy source.
o

Operating temperature
-40 °C to +55 °C by natural convection (fanless).
o

Dimensions and Weight
Physical dimensions (T1000): 4,3 cm (Height) x 43,6 cm (Width) x
o
28,6 cm (Depth);
Physical dimensions (S2020 and S2024G): 4,3 cm (Height) x 43,6 cm
o
(Width) x 31 cm (Depth);
Weight: approximately 5 kg.
o

Port types supported
Copper Ethernet– 10/100/1000baseTX with RJ45 connector;
o
Single-mode optic fibre – 1000baseFX with LC connector (SFP);
o
Multi-mode optic fibre – 100baseFX with ST (only for T1000
o
switches) or LC connector.

Ports supported
Copper interface module for Cat5e wires of 10/100/1000 Mbps
o
with auto-negotiation and detection/treatment of polarity
inversion;
Optic interface module of 100 Mbps with double fibre (100baseFX,
o
ST connector, multimode fibre) (only for T1000 switches);
Chapter 9 – Installation
REASON SWITCHES-TM-EN-3