GE T1000 Technical Manual page 252

GE Reason Switches
252

Port number;

Status of the port, that is, if port is Router port or
not.
Groups Information: provides information about MLD table groups
o
allowed in the switch.
VLAN ID (VID) number of the group;

Group address range of the group;

Port members, where is displayed which ports are

member of the group.
MLD SFM information, that is, MLD Source-Filtered Multicast
o
information. This information is related only to IGMPv3 and MLDv2
protocols, which has support to channel subscription.
 VLAN ID (VID) number of the group;
 Group address range of the group;
Port members, where is displayed which ports are

members of the group;
Mode of SSM filtering, which indicates filtering mode (VID

number, port number, address range of the group);
Source address, that is, IP address of the multicast source;

 Type of the filtering of SSM (source-specific mode);
 Hardware Filter / Switch, which indicates if data plane
sent by source of the group can be treated by chip or not.
Chapter 8 – Monitoring
REASON SWITCHES-TM-EN-3