Rj45 Ethernet (10/100/1000 Mbps) Port - GE T1000 Technical Manual

GE Reason Switches
4

RJ45 Ethernet (10/100/1000 Mbps) Port

Parameter
Speed
Duplex
Cable-type
Wiring Standard
Max Distance
Connector
Isolation
Warning:
To avoid the risk of electrical shocks when using copper cables the
connected cable length shall be less than 3m length and must not extend
beyond the cabinet where the product is used. Furthermore, the equipment
connected to both ends of the RJ45 cable shall be connected directly to a
common earth point within the same cabinet to avoid step voltage (Ground
Potential Rise) hazards.
REASON SWITCHES-TM-EN-3
Description
10/100/1000 Mbps
FDX/HDX (Full-duplex / Half duplex operation)
Category 5
TIA/EIA T568A/B
100 m
RJ45
1,5 kV
Chapter 11 – Technical Specifications
Notes
Auto-negotiating
Auto-negotiating
Shielded/Unshielded
Auto-Crossover, Auto-Polarity
RMS 1-minute
295