GE T1000 Technical Manual page 240

GE Reason Switches
240
On the top of the web page can be selected which port is required. Information
shown is as follows:
Total received frames at that port, including error frames. This
o
information is divided in all packets, all octets, all unicast, all
multicast, all broadcast and all Pause frames received;
Total transmitted frames at that port, including error frames. This
o
information is divided in all packets, all octets, all unicast, all
multicast, all broadcast and all Pause frames transmitted;
Total received frame size counter, which represents all frames
o
divided by its size. Shown values are 64-bytes frames to 1527-and-
above frames;
Total transmitted frame size counter, which represents all frames
o
divided by its size. Shown values are 64-bytes frames to 1527-and-
above frames;
Total Received Queue counters, in packets.
o
Total Transmitted Queue counters, in packets.
o
Total received error counters, in packets, which is divided in: Drop,
o
CRC/Aligment, Undersize, Oversize, Fragments, Jabber and Filtered.
Total transmitted error counters, in packets, which is divided in:
o
Drop, CRC/Aligment, Undersize, Oversize, Fragments, Jabber and
Filtered.
Chapter 8 – Monitoring
REASON SWITCHES-TM-EN-3