Default Settings; Leds; Binary Input; A.4 Default Settings - Siemens SIPROTEC 7RW80 Manual

A.4

Default Settings

A.4.1

LEDs

Table A-1
LEDs
LED1
LED2
LED3
LED4
LED5
LED6
LED7
LED8
A.4.2

Binary Input

Table A-2
Binary Input
BI1
BI2
BI3
Table A-3
Binary Input
BI4
BI5
BI6
BI7
SIPROTEC, 7RW80, Manual
C53000-G1140-C233-1, Release date 10.2010
Preset LED displays
Default function Function No.
Relay TRIP 511
Not configured 1
Not configured 1
Not configured 1
Not configured 1
Fail V balance 167
Fail Ph. Seq. V 176
VT brk. wire 253
Not configured 1
Brk OPENED
Binary input presettings for all devices and ordering variants
Default function Function No.
not pre-assigned -
>52-b 4602
>52-a 4601
Further binary input presettings for 7RW802*
Default function Function No.
not pre-assigned -
not pre-assigned -
not pre-assigned -
not pre-assigned -
Description
Relay GENERAL TRIP command
No Function configured
No Function configured
No Function configured
No Function configured
Failure: Voltage Balance
Failure: Phase Sequence Voltage
Failure VT circuit: broken wire
No Function configured
Breaker OPENED
Description
-
>52-b contact (OPEN, if bkr is closed)
>52-a contact (OPEN, if bkr is open)
Description
-
-
-
-
Appendix

A.4 Default Settings

219