Memory Configuration
Select "Memory Configuration" on the Advanced menu to display the following screen.
See the table below for setup options on the screen.
Option
Parameter
Extended Memory
1 MB
Test
1 KB
Every-Location
[Disabled]
DIMM Bank #1 -
Installed
#3
Disabled
Not Installed
Memory Retest
[Disabled]
Enabled
76 Setting Up Your Storage Server
Description
Extended memory test options run during
POST.
1MB: Tests every 1-MB memory.
1KB: Tests every 1-KB memory.
Every-Location: Tests every memory
location.
Disabled: Initializes memory.
Note: the smaller the test unit, the longer
the test takes during POST.
Indicates the current memory status.
"Normal" indicates the normal status,
"Error" indicates a memory error, and
"None" indicates no DIMM installed (view
only).
Bank #1 indicates DIMMs in DIMM socket
#1A and #1B.
Bank #2 indicates DIMMs in DIMM Bank
#2A and #2B.
Bank #3 indicates DIMMs in DIMM Bank
#3A and #3B.
(Memory is interleaved and two DIMMs
are used in pair.)
Clears memory error information and
retests all DIMMs on the next system boot.
This option will be automatically reset to
[Disabled] on the next system boot.
Your Setting
[ ]: Factory-set