NEC Express5800 series User Manual page 58

Hide thumbs Also See for Express5800 series:
Table of Contents

Advertisement

At least two persons are required to install the server. Securely hold the server and
2.
install it in the rack.
Firmly fit the inner rails on the sides of the server into the rail assemblies that are
installed on the rack, and then slowly push the server into the rack.
If the server is locked on its way into the rack, slowly push it in while pressing the
release levers on the right and left sides of the server.
When the server is installed for the first time, the mechanical parts are rather hard to
slide. You may feel strong friction when pushing in the server. In this case, strongly
push it in.
Release lever
Confirm that the sliding rails work normally by pulling the server out of the rack and
3.
pushing it in several times.
Confirm that the sliding rails work normally. If the sliding rails
NOTE:
are stuck to the rack frame and do not come out, reinstall them.
The sliding rail can be pulled out
from the rack.
48 Setting Up Your Storage Server
The sliding rail is stuck to the rack
frame and does not come out.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storage ns420

Table of Contents