NEC Express5800 series User Manual page 149

Firmly hold the hard disk drive (with the tray provided) and handle, and insert it into
7.
the slot.
IMPORTANT:
Push the hard disk drive until the handle hook butts to the frame.
Carefully hold the hard disk drive with both hands.
Slowly close the handle.
8.
The handle is locked when a "click" is heard.
IMPORTANT:
handle and tray.
NOTE: Confirm that the handle is hooked to the frame when having
inserted the hard disk drive.
Power on the server, start the SETUP utility, select [Boot] → [Hard Disk], and set the
9.
boot priority in the submenu.
This operation is necessary because installing an additional hard disk drive clears the
current setting of the boot priority.
Install the front bezel you removed in step 2.
10.
There are tabs on the left side of the front bezel. Engage the tabs with the server frame,
install the front bezel, and lock it with the security key.
Be careful not to get your finger caught between the
Upgrading Your NEC Storage 139