NEC Express5800 series User Manual page 160
Hide thumbs
Also See for Express5800 series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
DIMMS
Install additional DIMMs (Dual Inline Memory Module) to the DIMM sockets on the system
board in the server. The system board is provided with six DIMM board slots.
Up to 6GB of memory (1GB DIMM x 6) can be installed.
NOTE:
256MB DIMMs are installed in DIMM slots #1A and #1B at shipment.
IMPORTANT:
DIMMs are extremely sensitive to static electricity. Make sure to
touch the metal frame of the server to discharge static electricity
from your body before handling a DIMM. Do not touch the DIMM
terminals or on-board parts by a bare hand or place the DIMM
directly on the desk. For static notes, see the section "Anti-static
Measures" described earlier.
Make sure to use DIMMs authorized by NEC. Installing third-party
DIMMs may cause a failure of a DIMM or a failure in the server.
150 Upgrading Your NEC Storage
Advertisement
Table of Contents
