NEC Express5800 series User Manual page 103

Parameters
The SCSISelect utility to configure the internal SCSI controller of the server has the following
menu items and parameters. Read descriptions to select a correct parameter for each menu
item. For configuration of optional SCSI controllers and connected SCSI devices, see the
section "Configuring SCSI Controller on Optional Board" described later.
SCSI Bus Interface Definitions
To set three menu items under "SCSI Bus Interface Definitions", select a menu item with the
cursor keys (↓ or ↑) and press Enter to fix the item. Use the cursor keys (↓ or ↑) for parameter
selection. The following table lists menu items, available parameters, and descriptions.
Menu item
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI
Termination
Parameter Description
0 - [7] - 15 Select "7".
[Enabled] Select "Enabled".
Disabled
[Enabled] Enable or disable the SCSI termination.
Disabled Select "Enabled".
[ ]: Factory-set
Setting Up Your Storage Server 93