NEC Express5800 series User Manual page 108

The following table lists submenu items, available parameter, and descriptions.
Submenu item
Reset SCSI Bus at
IC Initialization
Display <Ctrl><A>
Message During
BIOS Initialization
Extended BIOS
Translation for DOS
Driver > 1 GByte
Verbose/Silent
Mode
Host Adapter BIOS [Enabled]
Domain Validation
Support Removable
Disks under BIOS
as Fixed Disks
BIOS Support for
Bootable CD-ROM
BIOS Support for
Int 13 Extension
98 Setting Up Your Storage Server
Parameter Description
[Enabled] Select "Enabled".
Disabled
[Enabled] Select "Enabled".
Disabled
[Enabled] Select "Enabled".
Disabled
[Verbose] Select "Verbose".
Silent
Enable or disable SCSI BIOS.
Disabled: NOT Scan Select "Enabled" for most cases other than
the following:
Disabled: scan bus
•
•
[Enabled] Enable or disable SCSI BIOS.
Disabled: NOT Scan Select "Enabled".
Disabled: scan bus
[Boot Only] Select "Boot Only" if "01:06:A" is selected for
"Bus:Device:Channel".
All Disks
Select "Disabled" if "01:06:B" is selected.
[Disabled]
When the default configuration is resumed,
"Boot Only" is selected for both channels. In
such a case, change the parameter for
"01:06:B" to "Disabled".
[Enabled] Select "Enabled".
Disabled
[Enabled] Select "Enabled".
Disabled
To boot the OS from a hard disk
connected to an optional SCSI controller.
(If the optional SCSI controller has no hard
disks connected, however, select
"Enabled".)
BIOS the SCSI controller may be
disabled to reserve an area in the
expansion ROM space if the controller has
no hard disks connected.
[ ]: Factory-set