NEC Express5800 series User Manual page 81

Advanced
Move the cursor to "Advanced" to display the Advanced menu. Menu items preceded by "
has submenus. Select an option with the "
See the table below for setup options on the screen.
Option Parameter
Reset Config Data [No]
Yes
Numlock [Off]
On
IMPORTANT:
The Boot Monitoring feature is not supported in this server.
If Reset Config Data is set to "Yes", boot device priority is also
cleared. Note the boot device priority before changing this
parameter. Restart the server with Exit Saving Changes option, start
BIOS SETUP utility, and restore the boot device priority.
" mark and press Enter to display its submenu.
►
Description
Select "Yes" to clear the configuration data
(system information stored by POST). This
parameter will be reset to "No" when the
server restarts.
Enable or disable the Numlock function at
system start-up. If "Auto" is selected, the
Numlock function will be enabled when a
keyboard entry is detected.
Your Setting
[ ]: Factory-set
Setting Up Your Storage Server 71
"
►