NEC Express5800 series User Manual page 133

The two (or Four is your NEC Storage NS420 is equipped with an optional 10/100 Dual
Port Adapter) 10/100 Ethernet port are not configured.
It is necessary to define your configuration to access the NEC Storage NS420 from
these ports.
You may want to configure these ports in a teaming configuration.
To configure Teaming
1. On the primary menu bar, select Maintenance.
2. Click on Terminal Services
3. Follow the prompts and enter your User name and Password.
4. Double-Click on the PROSet Icon in the Task Bar
The PROSet Properties dialog (Figure below) opens.
5. From the Action menu, select the Add to team then Create new team.
6. Follow the instructions of the Teaming Wizard.
Once the teaming configuration is done, you must configure TCP/IP for each team.
Configuring Your System 123