NEC Express5800 series User Manual page 55

Adjust the screw hole (slot) at the top end of each rail assembly to the screw hole in the rail
bracket, and lightly tighten the screw to temporarily secure the rail assembly and bracket. The
screw should not be firmly tightened for adjusting the depth and length of the rack by the rail
bracket.
Make sure of the right rail bracket or the left one when installing it. Confirm that when each
rail bracket is installed on the rail assembly, the catch at the top end is in the same orientation as
for the catch at the opposite end of the rail assembly.
Catch
Front side of the rack
Rail assembly
Screw holes
(Use the screw hole in accordance with the
depth of the rack. Lightly tighten the screw.)
Catch
Rail bracket
Rear side of the rack
Setting Up Your Storage Server 45