Set The Can Parameters - ICP DAS USA I-7530A-MR User Manual

3.2.4

Set the CAN parameters

Select the communication parameters of the CAN port and check the
"Enable CAN Filter" item to make the CAN filter enable if necessary.
About how to set the CAN Filter, please refer to the section 3.3.
Figure 3-11: The CAN port of I-7530A-MR configuration.
Set the "Pair Connection" parameter
3.2.5
When users select the "Pair Connection" communication mode, the
functions, "End of Command", "Fixed Tx CAN ID" and "Response with
CAN ID", are useful. In pair connection mode, all commands written to I-
7530A-MR COM port will be transferred to the CAN bus directly. For more
detail information about pair connection mode, please refer to the section
3.4.
Figure 3-12: The configuration for Pair connection.
I-7530A-MR Modbus RTU to CAN Converter User's Manual (Version 1.07, 06/2016) ------------- 28