ICP DAS USA I-7530A-MR User Manual page 40

Modbus rtu to can converter

Hide thumbs Also See for I-7530A-MR:

Table of Contents

Application 3:

This application may be used to construct a RS-232 device network

via CAN bus. The architecture is shown below.

Figure 3-24: The diagram of Application 3.

Configurations:

In order to apply this application, users need to configure the I-7530A-

MR#1, I-7530A-MR#2, and I-7530A-MR#3 as follows. The RS-232

configurations of these I-7530A-MRs are decided by the connected RS-

232 device.

Figure 3-25: I-7530A-MR#1 Configuration.

I-7530A-MR Modbus RTU to CAN Converter User's Manual (Version 1.07, 06/2016) ------------- 40

Table of Contents