Install The Uart2Can Utility - ICP DAS USA I-7530A-MR User Manual

3.1 Install the UART2CAN Utility

Step 1: Get the UART2CAN Utiltiy
The software is located at:
Fieldbus_CD:\CAN\Converter\I-7530A-MR\Utility
http://ftp.icpdas.com/pub/cd/fieldbus_cd/can/converter/i-7530a-mr/utility/
Step 2: Install .NET Framework 4 Client Profile component
The UART2CAN Utility tool requires the Windows Installer 3.1 and
the .NET Framework 4 Client Profile components. These components can
be obtained from the web site.
Windows Installer 3.1:
http://ftp.icpdas.com/pub/cd/fieldbus_cd/can/converter/i-7530a-
mr/utility/windowsinstaller3_1/
.NET Framework 4 Client Profile:
http://ftp.icpdas.com/pub/cd/fieldbus_cd/can/converter/i-7530a-
mr/utility/dotnetfx40client/
Figure 3-2: Setup the Windows Installer and .NET Framework.
I-7530A-MR Modbus RTU to CAN Converter User's Manual (Version 1.07, 06/2016) ------------- 22