Can Filter Configuration - ICP DAS USA I-7530A-MR User Manual

3.3 CAN Filter Configuration

There are two parts of the CAN filter configuration. One is "Download
CAN Filter" which are used to configure the CAN filter and download the
result into the I-7530A-MR module. The other is "Read CAN Filter" which
are used to read back the CAN filter configuration from the I-7530A-MR.
In this section, we will describe how to configure the CAN Filter with the
Utility tool.
Figure 3-15: The configuration for CAN Filter.
3.3.1 Create New CAN Filter
When users set the CAN filter first time, they need use "Download
CAN Filter" field.
Step 1: Click the "Create CAN Filter File" button to start setting CAN filter.
Then uses will see the following window.
I-7530A-MR Modbus RTU to CAN Converter User's Manual (Version 1.07, 06/2016) ------------- 32