Coordinates Setting-Out Measurement - Sokkia SRX1 Operator's Manual

17.3

Coordinates Setting-out Measurement

After setting the coordinates for the point to be set out, the SRX calculates the setting-out horizontal
angle and horizontal distance. By selecting the horizontal angle and then the horizontal distance
setting-out functions, the required coordinate location can be set out.
• Previously recorded setting-out points can be placed in order. Up to 30 points can be recorded.
• To find the Z coordinate, attach the target to a pole etc. with the same target height.
PROCEDURE
1. Select "Setting out" in <Menu> to display <Setting
out>.
2. Select "Station setup" to display <Height setting>.
If necessary, enter data for Backsight setup.

"17.2 Distance Setting-out Measurement"
steps 2 to 3
17. SETTING-OUT MEASUREMENT
95