Sokkia SRX1 Operator's Manual page 110

18. OFFSET MEASUREMENT
2. Select "Offset" in <Menu> to display <Offset>.
3. Select "Dist. offset".
Input the following items.
(1) Direction of the offset point.
(2) Horizontal distance from the target point to
the offset point.
• Direction of offset point
←
: On the left of the target point.
→ : On the right of the target point.
↓ : Closer than the target point.
↑
: Beyond the target point.
4. Sight the offset point and press [DIST] in the
screen of step 3 to start measurement.
Press [STOP] to stop the measurement.
The measurement results are displayed.
• Press [HVD/nez] to switch results for the target
point between distance/angle values and
coordinate/elevation values.
5. Press [OK] in the screen in step 4 to return to
<Offset>.
102