Sokkia SRX1 Operator's Manual page 107

5. Position the target on the line of sight and press
[DIST] to begin distance measurement.
The distance and direction to move the target until
the setting out point is located is displayed on the
SRX. The sighting point measurement results
(currently installed position of the target) are
displayed.
6. Sight the target and press [DIST]. Measurement
begins and the measurement results are
displayed.
7. Press [REM] in the second page to start REM
measurement.
The distance (height difference) and direction to
move the target until the sighting point and setting
out point are located is displayed on the SRX. The
sighting point measurement results are displayed.
Press [STOP] to stop measuring.
Find the setting-out point by moving the telescope
until the distance to the setting-out point reads 0m.
• Movement indicator (Red indicates that target
position is correct)
: Move the telescope near the zenith
:
: Move the telescope near the nadir

 : Telescope direction is correct

For details of other movement indicators:
"17.2 Distance Setting-out Measurement"
step 5
17. SETTING-OUT MEASUREMENT
Arrows indicate direction to move
99